GO FURTHER with your forage!
Amenity Pro Range
KUHN Square Baler Centres
KUHN Shop
Find a Dealer
VENTA CSC 6000 pneumatic seeding bar to use in combination with the HR 6004 power harrow and TF 1512 front hopper for a working width of 6 m. This seeding bar is equipped with SEEDFLEX seeding units: offset double discs on a parallelogram system.
Find Your Nearest Dealer Download Brochure
This seeding bar with double discs offset by 41 mm opens the furrow perfectly. The discs are parallelogram-mounted in two rows with a press wheel to control the seeding depth of each unit. With 35 cm offset between the front and rear rows, SEEDFLEX seeding units are suited to different uses, including the most extreme, and require no maintenance. Coulter pressure is exactly the same on both rows and is adjustable to 45 kg. The seed is guided to the bottom of the furrow to ensure a completely uniform seeding depth.
The seeding bar on the VENTA CSC 6000 is guided by the roller. This provides many advantages! Great stability and ground adaptation, even in stony conditions! The power harrow can disengage if it hits an obstacle, no need to readjust the coulter settings when changing the harrow’s working depth, and the coulter bar has a hydraulic lift system making it possible to work solo with the power harrow. High coulter clearance in lift position is a safety feature for manoeuvres.
The VENTA metering system on the TF 1512 hopper is renowned for its simple design and precise metering. The centralised metering system has large volumetric fluting for large seeds (wheat, barley, pea, bean…) as well as small fluting for small seeds (rape, alfalfa…). It manages application rates from 1 to 430 kg/ha. The metering unit is electrically driven so it is possible to modulate application rate during work, either manually or by GPS without getting out of the cab. This reliable, robust drive system requires no maintenance.
You can hydraulically adjust seeding depth, coulter pressure and the seeding bar’s hydraulic lift from the cab. Adjustments are quick and precise. It is also possible to do a length without seeding when necessary. Two cylinders with spacers serve as setting points for nominal seeding depth and coulter pressure.
Your comfort is important to us, that’s why VENTA CSC 6000 seeding combination and HR 6004 power harrow are equipped with the KLH 104 circuit selector as standard. From the cab, it enables you to control folding and unfolding of the combination, coulter bar lift, coulter bar height adjustment and the hydraulic top link. A double acting hydraulic valve is all that is required to control the four functions.
The VENTA CSC 6000 seeding bar is equipped with a removable assistance system for transport as well as an assistance system for the semi-automatic linkage system. Changing from transport to work position is very easy and you have no constraints while working. The removable transport frame carries the weight of the combination during road travel. Maximum authorised load on the rear axle and the tractor’s gross weight rating are respected. It is equipped with large-diameter pivoting twin wheels and is easy to remove with its semi-automatic linkage system, so it can be left at the end of the field to lighten the load while working. For road transport, the hydraulic top link is set to float position to ensure smooth driving, even on bumpy roads.
| COMBILINER VENTA CSC 6000 | |
|---|---|
| Working Width (m) | 6-00 |
| Transport Width (m) | 2-99 |
| Attachment | cat. 3 or 4N |
| Maximum tractor power requirement (kW/hp) | 256/350 |
| Primary PTO shaft | Walterscheid P series (reduced maintenance) |
| Power Harrow | HR 5004/6004 with DURAKUHN hard coated blades |
| Top link with safecty valve | - |
| Transport System | with semi-automatic attachment |
| Transport Wheel Dimensions | 10/75-15.3 (2x) |
| Brakes | - |
| Speed Signal | tractor |
| Blower drive | By tractor LS hydraulic or VARIO independent drive (800 - 1000 min) |
| Metering unit | 1 central metering unit with splines |
| Application Rate (kg/ha) | 1 to 430 |
| Seeding Unit | SEEDFLEX: 35cm offset double disc mounted on parallelogram, fitted with hard coated disc scrapers |
| Number of rows | 40 |
| Seeding (cm) | 15 |
| Seeding depth adjustment | hydraulic |
| Maximum coulter pressure (kg) | 45 |
| Coulter pressure adjustment | hydraulic |
| Hydraulic coulter bar lift | - |
| Disc inner scrapers | (with carbide plate) |
| Covering harrow | - |
| Side markers with safety | rear folding |
| Rollers | MAXIPACKER or STEELLINER |
| Lighting and signalling | - |
| Electronic equipment | QUANTRON S-2 on TF 1512 |
| KLS 104 (hydraulic sector) | - |
| Required hydraulic equipment | with TF 1512: 2 x DA |
| Approx weight (kg) (MAXIPACKER roller) | 5,250 |
| (STEELINER roller) | 5,400 |
