GO FURTHER with your forage!
Amenity Pro Range
KUHN Square Baler Centres
KUHN Shop
Find a Dealer
Five models available in 3 working widths (1.53 m, 1.79 m and 2.14 m) for individual farms that wish to maintain their roadsides, field borders and other grassy areas. The TBES 10 series also offer a large offset.
Find Your Nearest Dealer Download Brochure
The TBE 10 and TBES 10 are suitable for multiple uses: working behind the tractor for roadside maintenance, in offset or tilted position for maintaining embankments, ditches and hedges.
Their kinematics allow them to work from -65 degrees (ditches) to ’90’ degrees (hedges).Grass and reeds will not resist them.
Thanks to its externally fitted gearbox, the TBES 10 series shredder has a larger lateral offset than the TBE 10 models. It can reach between 2.66 and 3.29 m from the centre of the tractor.
This feature provides you with the following benefits:
Offset and angling values speak for themselves. Access difficult areas thanks to the exceptional kinematics of the TBE and TBES 10 series. The TBES is characterised by its gearbox external position which allows a larger offset when compared to the TBE 10 series.
TBE and TBES 10 series shredders are equipped with heavy hammer knives for work in grassy areas and undergrowth.
When meeting an obstacle, the machine frame is protected by a spring-loaded non-stop safety system. After the obstacle is cleared the machine will automatically return to the working position. Moreover, the mechanical parts which were exposed to the impact (body, belt guard, bearing…) are all protected and the casing features a bolted 4mm thick sheet metal lining for increased resistance to impacts and wear.
The rotor is the main component of the machine. A single imbalance can affect wear of all other components.
To start on a good bases, every rotor leaving the factory is carefully balanced thanks to meticulous procedures and high quality machining tools.
TBE and TBES 10 series models are designed for working between
40 and 100 hours per year:
Owing to the adapted tools, the 450 mm and 425 mm diameter roller, (respectively for the TBE 10 series and TBES 10 series) and the two welded counter knives, the shredding result will be excellent, meeting today’s issues in terms of shredding:
The roller is as close as possible to the rotor. In this way, residues are ejected over the roller. Their decomposition is quicker because the passage of the roller does not compact them. The visual result is impeccable.
Key features:
| TBE 16 | TBES 16 | TBE 19 | TBES 19 | TBE 22 | TBES 22 | |
|---|---|---|---|---|---|---|
| Working width (m) | 1.53 | 1.53 | 1.79 | 1.79 | 2.14 | 2.14 |
| Transport width (m) | 1.78 | 2.07 | 2.04 | 2.33 | 2.39 | 2.68 |
| Outer rotor diameter (mm) | 425 | 425 | 425 | 425 | 425 | 425 |
| Rotor speed (min-1) | 2325 | 2325 | 2325 | 2325 | 2325 | 2325 |
| Tool linear speed (m/s) | 52 | 52 | 52 | 52 | 52 | 52 |
| Number of heavy hammer knives | 18 | 18 | 20 | 20 | 24 | 24 |
| Number of Y knives | 36 | 36 | 40 | 40 | 48 | 48 |
| Counter knives | As standard, 2 welded | As standard, 2 welded | As standard, 2 welded | As standard, 2 welded | As standard, 2 welded | As standard, 2 welded |
| Reinforcing plate | As standard 4mm, welded | As standard 4mm, welded | As standard 4mm, welded | As standard 4mm, welded | As standard 4mm, welded | As standard 4mm, welded |
| Skid kit | As standard | As standard | As standard | As standard | As standard | As standard |
| Sensor roller diameter (mm) | 168 | 168 | 168 | 168 | 168 | 168 |
| Working height adjustment | By roller with fixed ends | By roller with fixed ends | By roller with fixed ends | By roller with fixed ends | By roller with fixed ends | By roller with fixed ends |
| Non-Stop safety | As standard - with spring and mechanical stop | As standard - with spring and mechanical stop | As standard - with spring and mechanical stop | As standard - with spring and mechanical stop | As standard - with spring and mechanical stop | As standard - with spring and mechanical stop |
| PTO speed (min-1) | 540 | 540 | 540 | 540 | 540 | 540 |
| Free wheel integrated in the central gearbox | As standard | As standard | As standard | As standard | As standard | As standard |
| Number of SPBX belts | 3 | 3 | 4 | |||
| Belt type | SPBX 1450 | SPBX 1450 | SPBX 1450 | SPBX 1450 | SPBX 1450 | SPBX 1450 |
| Minimum theoretical power requirement at gearbox (kW) | 44 | 45 | 51 | 51 | 59 | 59 |
| Minimum theoretical power requirement at gearbox (hp) | 60 | 60 | 70 | 70 | 80 | 80 |
| Maximum power allowable at gearbox (kW) | 81 | 81 | 81 | 81 | 81 | 81 |
| Maximum power allowable at gearbox (hp) | 110 | 110 | 110 | 110 | 110 | 110 |
| Hitch | 3 point - fixed - cat 2 | 3 point - fixed - cat 2 | 3 point - fixed - cat 2 | 3 point - fixed - cat 2 | 3 point - fixed - cat 2 | 3 point - fixed - cat 2 |
| Required tractor hydraulic connections | 1 SA + 1 DA | 1 SA + 1 DA | 1 SA + 1 DA | 1 SA + 1 DA | 1 SA + 1 DA | 1 SA + 1 DA |
| Weight with equipment (kg) | 744 | 750 | 774 | 800 | 804 | 890 |
