The PROFILE PLUS 2 DL mixers have 2 vertical augers, straw-blowing turbine, a large hopper and feed out via direct side doors. Available in 24 to 34 m3 capacities, these machines are suited to herds of between 120 and 265 cattle.
Find Your Nearest Dealer Download Brochure
To ensure the long-term performance of your PROFILE PLUS 2 DL mixer wagon, the K-NOX augers are designed to substantially reduce wear and tear caused by abrasion and silage acidity.
The wear and tear which affects the mixing auger over the years, will be spread evenly across the whole surface of the mixing auger and also on the central cone. That’s why K-NOX mixing augers are built entirely from the same alloy: auger, cone and scraper.
K-NOX is an alloy containing:
– Chrome (“stainless” steel) providing greater resistance to the acidic silage effluent.
– Ferrites provide mechanical resistance in particular when loading heavy and abrasive products.
The K-NOX technology will increase the resale value of your machine should you decide to sell it. Second-hand mixers are valued based on the wear of the augers, rather than their age. A machine whose main components are still in perfect condition will naturally retain a higher resale value.
The double-pitch angle of the auger enables quick breakdown of feed, no matter how full the machine already is.
To reduce power consumption, the PROFILE range is equipped with asymmetric knives which have a “self-cleaning” effect and also have a progressive-cutting knife edge for constant torque transfer. The continuous auger helix naturally moves the fodder from the bottom to the top of the tub for even mixing with no forced movements, reducing fuel consumption during the mixing process.
The auger material and design has been selected to provide maximum resistance to wear.
The machine transmission is made up of a two-stage bearing therefore even during breakdown of a whole bale, stress is absorbed.
The combination of the pre-stressed subframe and the solid auger base provides maximum resistance to the load bearing in the bottom of the machine.
The unit is fitted on a collar which reaches up to approximately half the auger height, thus protecting the transmission from lateral forces exerted on the auger.
Precision in small mixtures and accuracy for large tonnages.
The weighing system on the PROFILE 2 DL-CL-PLUS range is designed with load cells integrated into a cradle between the axle and the tub. The load cells are positioned in the direction of travel of the machine, not perpendicularly. None of the constraints related to transport affect the structure of the load cells.
The sensitivity of the 63.50 mm diameter load cells is much better than for 80 mm load cells. Small mixtures (pre-mixes of a few dozen kilograms) will be weighed and managed with greater precision.
The large number of load cells (five in total for the PROFILE 2 DL-CL-PLUS range) improves the weighing accuracy for even the heaviest mixtures (mixtures of fodder and feed with a low percentage of dry matter).
Precision in small mixtures and accuracy for large tonnages.
The weighing system on the PROFILE 2 DL-CL-PLUS range is designed with load cells integrated into a cradle between the axle and the tub. The load cells are positioned in the direction of travel of the machine, not perpendicularly. None of the constraints related to transport affect the structure of the load cells.
The sensitivity of the 63.50 mm diameter load cells is much better than for 80 mm load cells. Small mixtures (pre-mixes of a few dozen kilograms) will be weighed and managed with greater precision.
The large number of load cells (five in total for the PROFILE 2 DL-CL-PLUS range) improves the weighing accuracy for even the heaviest mixtures (mixtures of fodder and feed with a low percentage of dry matter).
For each member of the herd to get their maximum feed intake, the feed-out of the mixed ration must be evenly mixed and distributed across the whole length of the feed passage. It’s important to reduce competition for feed between livestock in the same pen. All animals must get their fair share of quality mixed rations!
When the animals return to the buildings after grazing, providing a homogeneous ration is the best solution to avoid them pushing and shoving for feed.
The PROFILE range features an impressive selection of feed-out solutions to ensure distribution of the rations in all the types of buildings. Whether you have sheds with no separate exit, troughs with retaining rims or very narrow feed passages, feeding tables on both sides of the passage requiring simultaneous distribution, or other constraints requiring distribution from the rear of the machine, you will find what you need in the PROFILE range.
Distribution chutes can be fitted upon request to the right or left or rear central for feed delivery into all building configurations.
The doors are the largest on the market (their width represents over 60% of the auger diameter).
The PROFILE mixer wagon is fitted with a deflection plate to avoid driving over the feed-out. The protective canvas prevents fodder projections beyond the trough.
The PROFILE range can be fitted with a large selection of hydraulically tilting conveyors to deliver feed to raised troughs. The tilting conveyors come in different lengths and are designed with PVC belts.
They start up automatically when the hatch door is opened to prevent forage build-up at the tub outlet.
The PROFILE tilting conveyors are quiet, always clean and easy to service: simply adjust the belt tension on a regular basis.
PROFILE PLUS 24.1 DL | PROFILE PLUS 26.2 DL | PROFILE PLUS 28.2 DL | PROFILE PLUS 30.2 DL | PROFILE PLUS 34.2 DL | |
---|---|---|---|---|---|
Capacity (m3) | 24 | 26 | 28 | 30 | 34 |
Mixing system | 2 vertical augers | 2 vertical augers | 2 vertical augers | 2 vertical augers | 2 vertical augers |
Height of mixing auger (mm) | 900 | 900 | 1,100 | 1,100 | 1,300 |
Max. blowing distance | On the right up to 18m | On the right up to 18m | On the right up to 18m | On the right up to 18m | On the right up to 18m |
Minimum PTO power requirement kW (hp) | 67 (92) > 81 (110) | 70 (95) > 85 (115) | 73 (100) > 88 (120) | 77 (105) > 92 (125) | 81 (110) > 95 (130) |
PTO speed (min-1) | 540 | 540 | 540 | 540 | 540 |
Output mini/maxi (l/min) at 180 bar (pressure required) | 20-50 | 20-50 | 20-50 | 20-50 | 20-50 |
Minimum tractor hydraulic requirement | 1 SA with free return | 1 SA with free return | 1 SA with free return | 1 SA with free return | 1 SA with free return |