Powerful tines for fast seeding

The MEGANT mounted tine seed drills for min-till seeding offer working width from 4.00 to 6.00 m. They establish your crops quickly and homogenously on tilled or min-till soils. Reduce your costs without affecting the quality of work.

 

Find Your Nearest Dealer Download Brochure
Are you trying to optimize your seeding time? The MEGANT tine seed drill allows you to reduce your costs while increasing your work output and maintaining quality of seed. Discover the simplicity, precision and comfort the MEGANT seed drill can offer you.

Your Benefits

Obtain the best work output!

Seed up to 60 hectares per day!

The 1,800 litre hopper can hold up to 1,200 kg of wheat for a significant operating range. Working widths of 4.00 to 6.00 m extend the daily output potential. Thanks to its simple design, the MEGANT tine seed drill is considerably lighter than other seeding combinations. Therefore, it can be driven faster use with tractors of only 150 hp. All this contributes to an optimal daily work output.

No more stops even in plant residues

With the mounted MEGANT tine seed drill, the risk of blocking is minimised. This is thanks to the 4 rows of tines which allow for residues to pass through the machine with very few components to restrict the flow. For easy seeding depth adjustment, the operator just needs to move the pins in the multiple holed plate.

Easier seeding along the field border

The rear folding side markers facilitate seeding along the field border, close to hedges or trees. They are fitted as standard with an obstacle clearance safety. The side markers are fitted with a bolted safety system.

Keep it simple and precise

The work quality is ensured with the seeding tines

The seeding tines are mounted on a beam with an exclusively designed profile with polyurethane blocks. Combined with a specific tine profile, this ensures good penetration capacity and stability ensuring a regular seeding depth. A vertical travel range of approximately 15 cm allows the machine to overcome large obstacles. Owing to the seeding tines, you benefit from fast seeding without modifying the establishment quality, seeding lines free of plant residues and good soil penetration even with reduced ground pressure. You can seed on ploughed or min-tilled land thanks to a simple design and with limited maintenance. Your fuel consumption and power requirement are reduced.

The secret of improved soil/seed contact

The rear roller improves ground following on irregular fields to ensure accurate seeding depth and promotes germination through improved seed-soil contact. The MEGANT seed drill rests on both its front wheels and rear roller. It follows the ground contours independently of tractor movements. The roller consists of separate wheels (for less power requirement) mounted on elastomer blocks to ensure clearance when meeting obstacles. It is preceded by discs designed to close the seeding lines.

Perfect cover: an asset for high-speed seeding

The covering harrow is fitted with two rows of flexible tines. The first one fills the furrow of the last seeding tines, whereas the second row finishes the seedbed and covers the seeds. The trailing tine profile facilitates the passage of plant debris. You also benefit from two track eradicators with shear-bolt safety fitted as standard and adjustable in spacing and depth.

Your comfort is significant

A powerful blower driven by an independent hydraulic circuit

The blower is driven by an independent hydraulic circuit via a pump directly connected onto the PTO output. It can be driven from 750 to 1,000 rpm. It has no u-joints, no risk of clogging at high application rates or speeds. This blower is not sensitive to dust and allows making fuel savings when working with lower engine speeds.

Practical and user-friendly with the QUANTRON S-2 control box

As standard, you benefit from the electronic management of the MEGANT tine seed drill thanks to the practical and user-friendly terminal QUANTRON S-2. Its colour screen allows you to monitor different functions such as the distribution drive via an electric motor, the blower, the minimum seed level or the side markers. As far as seeding management is concerned, distribution is started and stopped directly, application rate is adjusted during work and displayed in kg/ha and you can change it instantly without recalibrating. You can access factory setting tables for 14 different varieties and calibrate the seed drill via an electric motor. The saving of setting tables for 30 seed types provides undeniable adjustment comfort and speed. The daily counter also indicates the hectares, hours of work, quantity sown and can store up to 200 fields by name, seed type, quantity sown, worked hours and start/end dates.

Easy to clean and access

The distribution head and tubes of the MEGANT seed drill are located on the outside of the hopper for easier filling and cleaning. Appreciated when changing seed varieties! The foldable frame design and the metering unit position ensure easy access for adjusting or emptying residual seeds. In folded position, the metering unit is fully free of access: no need to step over components to control the flow or empty the hopper.

Specifications

Technical characteristics

MEGANT 480MEGANT 500MEGANT 560MEGANT 600
Hopper capacity approx (l)1800180018001800
Filling height approx (m/ft)2.15/7'1'' from the ground2.15/7'1'' from the ground2.15/7'1'' from the ground2.15/7'1'' from the ground
Working width (m/ft)4.80/15'7''5.00/16'4''5.60/18'4''6.00/19'7''
Transport width (m/ft)2.95/9'7''2.95/9'7''2.95/9'7''2.95/9'7''
Width in working position with markers folded (m/ft)5.29/17'4''5.29/17'4''6.29/19'8''6.29/19'8''
Attachment3-point, cat. 2 and 33-point, cat. 2 and 33-point, cat. 2 and 33-point, cat. 2 and 3
Number of rows36363640
Row spacing (cm/in)13.3/5.24''13.9/5.47''15.5/6.10''15/5.91''
Blower driveeither by independent hydraulic circuit driven from 750 to 1000 min or the tractors hydraulicseither by independent hydraulic circuit driven from 750 to 1000 min or the tractors hydraulicseither by independent hydraulic circuit driven from 750 to 1000 min or the tractors hydraulicseither by independent hydraulic circuit driven from 750 to 1000 min or the tractors hydraulics
Seeding unitstine coulter with point in aggressive or trailing positiontine coulter with point in aggressive or trailing positiontine coulter with point in aggressive or trailing positiontine coulter with point in aggressive or trailing position
Underbeam clearance (cm/in)50/20''50/20''50/20''50/20''
Seeding depth adjustmentthrough the wheelsthrough the wheelsthrough the wheelsthrough the wheels
Wheel dimensions26/12x1226/12x1226/12x1226/12x12
Covering harrow----
Tractor track eradicators(four, non-stop, adjustable in depth and spacing)(four, non-stop, adjustable in depth and spacing)(four, non-stop, adjustable in depth and spacing)(four, non-stop, adjustable in depth and spacing)
Side markers with safetyfolding to the rearfolding to the rearfolding to the rearfolding to the rear
Lighting equipment----
Weight (kg/lbs)2040/44972040/44972110/45622150/4740
Electronic equipmentQUANTRON S-2 box including electric metering unit drive, gear engaged by the seed drill or cable connected to the tractor radarQUANTRON S-2 box including electric metering unit drive, gear engaged by the seed drill or cable connected to the tractor radarQUANTRON S-2 box including electric metering unit drive, gear engaged by the seed drill or cable connected to the tractor radarQUANTRON S-2 box including electric metering unit drive, gear engaged by the seed drill or cable connected to the tractor radar
Necessary hydraulic equipment1 x DA for the side markers 1 x DA for machine folding, also used to set the pressure in the accumulator 1 x DA for the front levelling bar (option) 1 x SA with free return when blower is driven by tractor hydraulics (option)1 x DA for the side markers 1 x DA for machine folding, also used to set the pressure in the accumulator 1 x DA for the front levelling bar (option) 1 x SA with free return when blower is driven by tractor hydraulics (option)1 x DA for the side markers 1 x DA for machine folding, also used to set the pressure in the accumulator 1 x DA for the front levelling bar (option) 1 x SA with free return when blower is driven by tractor hydraulics (option)1 x DA for the side markers 1 x DA for machine folding, also used to set the pressure in the accumulator 1 x DA for the front levelling bar (option) 1 x SA with free return when blower is driven by tractor hydraulics (option)
Hydraulic selector(Used to control with front levelling bar, folding and accumulator pressure functions with only 1 DA hydraulic valve)(Used to control with front levelling bar, folding and accumulator pressure functions with only 1 DA hydraulic valve)(Used to control with front levelling bar, folding and accumulator pressure functions with only 1 DA hydraulic valve)(Used to control with front levelling bar, folding and accumulator pressure functions with only 1 DA hydraulic valve)

Media