The EUROMIX mixer tub geometry was designed to make bucket loading easier. The large opening, on single and double auger models, allows for clean and easy loading – even with larger buckets. Depending on the model, the top part of the EUROMIX tub can be fitted with a reinforced rim or an extension with a cross-section ring, to guarantee a longer machine service life. So even if the machine is hit by the loader, the tub structure will not be damaged.
The double-pitch angle of the auger enables quick breakdown of feed including whole bales, no matter how full the machine already is.
To reduce power consumption, the EUROMIX range is equipped with asymmetric knives which give a “self-cleaning” effect and also have a progressive-cutting knife edge for constant torque transfer. The continuous auger helix naturally moves the fodder from the bottom to the top of the tub for even mixing with no forced movements, reducing fuel consumption during the mixing process.
The auger material and design has been selected to provide maximum resistance to wear.
The machine transmission is made up of a two-stage bearing therefore even during breakdown of a whole bale, stress is absorbed.
The combination of the pre-stressed subframe and the solid auger base provides maximum resistance to the load bearing in the bottom of the machine.
The unit is fitted on a collar which reaches up to approximately half the auger height, thus protecting the transmission from lateral forces exerted on the auger.
For a healthy herd, the ration must be evenly mixed and perfectly distributed, no matter what the levels of dry matter are.
The EUROMIX range’s mixing auger was designed with the chopping performance of long fibres in mind, as well as preserving wetter fodders such as maize silage.
Various configuration options tailor the machine to your needs.
The EUROMIX tubs are polygonal so as opposed to “rolled” bodies, the tubs have multiple sides. This design greatly improves machine resistance to strain, particularly when breaking down whole bales. This design also saves time when chopping longer forage thus decreasing overall mixing time. The counter-knives are positioned diagonally with respect to the auger axis and jointed at the top, thereby reducing the space between the counter-knife and the auger and increasing the contact surface with the fodder.
Standard on EUROMIX models, large section chassis provide weighing stability and accuracy. The chassis is the main part of the machine and gets put under high levels of stress during loading, transport and unloading phases. The longevity of the weigh cells is guaranteed as they are positioned between the tub and the chassis. It is this design that allows weighing operations to be performed while the machine is unhitched (as the weigh cells are still under stress). The option to fit your machine with a battery kit will allow the weighing system to be powered without being connected to the tractor.
Programming (via cloud communication) from PC or smartphone – Editing of ingredients, rations and feed batches from the weighing terminal – Editing of the number of animals from the weighing terminal – Lists and reports of completed programs with summary of operator discrepancies – Multi-user management (admin – users) – Monitoring with indicator customisation – Data exchange via 3G modem or USB flash drive – Calculation of ration costs and dry matter content – Stock management
You can choose one of these digital devices to run the solutions offered along with the weighing terminals. You can take your new assistant with you everywhere! You’ll be able to control your mixer weighing system during loading and feeding, but also from your office. – with the indestructible 5,7’’ mobile assistant, you have your weighing system in your pocket! – or the all terrain 8’’ mobile assistant for optimal navigation!
The 2 applications KUHN Datamix VIEW and KUHN Datamix CONTROL are pre-installed on your weighing assistant. You’re bound to have all your needs met with the easy-to-use secondary display unit (KUHN Datamix VIEW) and the application that lets you program and perform all the functions of your mixer’s weighing unit from your assistant (KUHN Datamix CONTROL). You can access all the weighing data within a communication range of 90 m around your machine. The signal is automatically reset when you re-enter the range.- With the KUHN Datamix VIEW, your assistant becomes the secondary display you’ll never leave behind!- with the KUHN Datamix CONTROL, your assistant becomes the control centre for your machine’s weighing system.
The cross-conveyor can be positioned at the front or rear of the EUROMIX range.
Feed can be distributed on the left or right-hand side, as standard. The conveyor is driven by a hydraulic motor at each end guaranteeing perfect operation regardless of the rotation direction.
The PVC belt ensures that fodder doesn’t travel back underneath the belt. The feed passage always remains clean after distribution.
As an option, the cross-conveyor can be hydraulically offset by 250 mm to the left or the right of the machine: ideal for fibrous rations!
|EUROMIX 28.3 CL||EUROMIX 33.3 CL||EUROMIX 39.3 CL||EUROMIX 45.3 CL|
|Mixing system||3 vertical augers||3 vertical augers||3 vertical augers||3 vertical augers|
|Minimum PTO power requirement kW (hp)||73 (100) > 88 (120)||86 (117) > 102 (140)||98 (134) > 117 (160)||111 (151) > 132 (180)|
|PTO speed (min-1)||540||540||540||540|
|Output mini/maxi (l/min) at 180 bar (pressure required)||20-50||20-50||20-50||20-50|
|Minimum tractor hydraulic requirement with direct control||3 DA for chute, cross conveyor and hydraulic jack and 1 DA per additional function||3 DA for chute, cross conveyor and hydraulic jack and 1 DA per additional function||3 DA for chute, cross conveyor and hydraulic jack and 1 DA per additional function||3 DA for chute, cross conveyor and hydraulic jack and 1 DA per additional function|
|Minimum tractor hydraulic requirement with electric control (optional)||1 SA with free return||1 SA with free return||1 SA with free return||1 SA with free return|